| ACS products |
|
|
|
| industries served |
|
|
|
Coilmaster
6000
Heavy Duty Stock Take-up
Features:
- 6000 pound weight capacity
- 48" coil diameter capacity
- 16" material width
- Edge control system
- Programmable stock tension - constant or variable
- 12" diameter by 16" wide collapsible mandrel
- Urethane coated infeed guide roller
- Microprocessor controlled with operator interface
- Reversible left hand and right hand operation
- 3 HP DC drive
Options:
- Back flange (aluminum or steel)
- Paper payout spindle
- 16" diameter collapsible mandrel
- Second roller for S-wrap infeed
- Tail clamp
- Custom mandrels and flange arrangements
- 5 HP DC drive
|
|
| Specifications: |
|
| Power requirements: |
|
240 VAC three phase, 20A |
| Air supply (required with tail clamp): |
|
80 PSI (minimal CFM) |
| Stock size: |
|
1 to 16 inches wide |
| Coil size: |
|
12 inch standard ID
16 inch optional ID
48 inch maximum OD
16 inch wide, 6000 pound weight capacity
|
| Feed rate: |
|
50 FPM with 12 inch mandrel standard
(others available on request)
|
| Mandrel: |
|
Standard 12 inch (expandable 11.5 to 12.5 inches)
Optional 16 inch (expandable 15.5 to 16.5 inches)
|
| Feed direction: |
|
Left to right or Right to left |
| Edge control system: |
|
Analog optical edge sensor with programmable offset,
ball screw actuator driven by a 1/2 HP DC motor and controller,
and linear slides. Automatically adjusts mandrel position
to provide near perfect coil geometry. |
| Spindle motor: |
|
Programmable torque/tension, 3 HP brushless DC drive
0 to 9,500 in-lbs torque at the spindle. Optional 5 HP brushless
DC drive 0 to 15,000 in-lbs torque at the spindle.
Programmable tension set point at minimum and maximum coil diameter. |
|
|
|
|
