Secondary Machines for Metal Processing
ACS provides Metal Processors with exactly the right machine
for their application. Each machine pictured here began with
a standard design and was specialized for our customer's process.
The Square Wire Traverse Takeup uses a flange detection assembly
to precision wind 0.25" wide square wire that is to be
coated with insulation.
The Light Duty Coil Payout is designed to pay out thin metal
strip at only 6 inches per minute. The design is based on
the Wyndmaster 500 Horizontal Payout with modifications for
reduced RPM's, low tension operation, and payout height matching
the press height.
The Welding Line Accumulator stands 15 feet tall and provides
almost 200 feet of accumulation for a 3.25 inch wide metal
strip. The accumulator uses driven expansion to maintain constant
tension for a downstream process.
The Heavy Duty Turntable is used to shrink wrap pallets of
processed metal. We designed this machine for the heavy loads
that aren't compatible with off-the-shelf tables.
|
